Home Entertainment

 

Not All HDMI Cables Are Created Equal




Two moderately-priced 1-meter cables tested by DPL Labs had different test results.

An illustrated HDMI cable

When it comes to HDMI performance, let me restate that reliability has been the major issue, and it usually surfaces with people breaking the rules.

This is not new, we’ve been following specification rules since the invention of the wheel, so why has it now taken such a toll?

In our experience, some manufacturers have shown a lack of competency in making HDMI products right the first time and continuing that over the products’ life span. It is absolutely false that all cables are the same, even at short lengths.

DPL Labs is more than just a certification company. It offers additional services that manufacturers, vendors, retail operations and even distribution firms look deep into when they are either buying or building products to verify that the integrity is what they were promised.

These are called PDRs (Provisional Design Reviews). This service provides testing and examination of cables, Blu-ray players, switchers, A/V receivers and baluns from many firms.

Here’s an example: Two relatively inexpensive 1-meter cables came in for testing. They were being used with cable TV, so not such a big deal. When tested with one TV, however, only one of the cables worked, but with another TV they both worked. They were from two different manufacturers, and we were supplied two of each cable.

Upon testing and inspection we found that the integrity of the serial interface used to communicate the HDCP and EDID on one cable proved to be substantially slower in response compared to another cable that did work. By using different loads we were able to see, by way of an oscilloscope, that the rise times of these serial channels were very different. In an effort to expose why, we dissected each product.

Neither cable supported a shielded wrap around the video channels … that’s a first no-no. They both don’t twist the serial wires … sort of a no-no. However, the one that failed used a very thin solid gauge wire size for the HDCP/EDID channel compared with the cable that worked. The HDCP/EDID wires within the cable that failed are at least two times smaller in diameter than the one that worked. That smaller diameter HDMI cable was easy to bend and connect, but the consequences were dire, because the installer had no other cables to replace these, and it took yet another trip to the site to clear it all up.

Could the cable company still have made a thinner diameter cable with enough integrity for it to work with more devices? Yes! All it had to do was determine the intended cable length and predict, to some standard, the gauge of wires needed to support the video, supply voltage and the HDCP/EDID lines. Of course, the cable would not be the best cable in the world, but it sure would have had a better chance by decreasing the gauge of the video wires and increasing the gauge to the HDCP/EDID wires. When you make a product that sells for cheap, it becomes a give-and-take.

This example is not to say you must go out and purchase the most expensive cable either.

So what do you do? Buy from the people that can explain their differences with factual data, and not from the jacket style, color or price alone. Remember, one return visit can cost you time, money and grief.

By Jeff Boccaccio, President, DPL Labs

Article courtesy of ElectronicHouse.com

Comments

That's a good question. A lot of it depends on what those needs are. You might be interested in sharing some of the specifics on our Ask a Pro forum, where you'll be able to get more help.
http://electronichouse.com/forums/viewforum/2/

Hope this helps.

Post new comment

  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
  • Images can be added to this post.
  • Glossary terms will be automatically marked with links to their descriptions. If there are certain phrases or sections of text that should be excluded from glossary marking and linking, use the special markup, [no-glossary] ... [/no-glossary]. Additionally, these HTML elements will not be scanned: a, abbr, acronym, code, pre.

More information about formatting options

Local Guides

 All Guides
   Alabama
   Alaska
   Arizona
   Arkansas
   California
   Colorado
   Connecticut
   DC
   Delaware
   Florida
   Georgia
   Hawaii
   Idaho
   Illinois
   Indiana
   Iowa
   Kansas
   Kentucky
   Louisiana
   Maine
   Maryland
   Massachusetts
   Michigan
   Minnesota
   Mississippi
   Missouri
   Montana
   Nebraska
   Nevada
   New Hampshire
   New Jersey
   New Mexico
   New York
   North Carolina
   North Dakota
   Ohio
   Oklahoma
   Oregon
   Pennsylvania
   Rhode Island
   South Carolina
   South Dakota
   Tennessee
   Texas
   Utah
   Vermont
   Virginia
   Washington
   West Virginia
   Wisconsin
   Wyoming